Shabupc.com

Discover the world with our lifehacks

Where do curtain rod brackets go?

Where do curtain rod brackets go?

Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.)

Do I need a drill to put up a curtain pole?

Magnetic curtain rods are one of the easiest ways to hang a curtain without drilling. While uses for magnetic curtain rods are limited, they can be an excellent choice for hanging curtains over a metal door. Measure your window opening to determine what size curtains you need.

How do you hang curtain rails without drilling?

To hang curtains using a damage-free installation method, try one of these options:

  1. Secure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths.
  2. Use magnetic curtain rods.
  3. Use tension rod curtains inside window frames.

Where should a curtain rod be placed?

Your best move is to hang curtains within 8 inches of the top of the window frame. For very tall windows, which are popular in many modern homes, that means placing the rod as close to the ceiling as possible—in fact, you might want to install rods designed to actually hang from the ceiling.

Which way up do curtain hooks go?

Consider where the hooks need to be placed (this can be adjusted), then starting at the edge of the curtain, insert the needle end of the drapery hook (point upwards) in to the lining of the flat buckram heading being careful not to push the hook through the lining to the face side of the curtain.

What tools do you need to install curtain rods?

You’ll need:

  1. pencil.
  2. level.
  3. measuring tape.
  4. drill and drill bits.
  5. screwdriver.
  6. drywall anchors.
  7. curtain rod with at least two brackets and two finials.

How do you hang a curtain rod without a power drill?

How to Hang Curtain Rods Without a Drill

  1. Measure the space between your two walls.
  2. Push the rod through your curtain if the curtain has eye-holes.
  3. Unlock the curtain rod ends and get a friend to help you extend both sides of the rod against the walls.

How to hang curtains correctly the first time?

Curtain rod with brackets

  • Screws
  • Tape measure
  • Level
  • Screwdriver
  • Pencil
  • Wall anchors (optional)
  • How to put up a curtain pole?

    A drill

  • Drill bit
  • Tape measure
  • Screwdriver
  • Sprit Level (I used my Stanley Cubex laser level again,although not really necessary)
  • Knife
  • Curtain pole
  • Curtain hooks
  • Curtains
  • How to correctly hang a drape at home?

    Position your first wall mount bracket on the wall where you made a mark.

  • Repeat the first step on the other side of your window.
  • Drill guide holes where you’ve placed your marks for the mounting hardware.
  • Fasten the brackets to the walls using your drill or screwdriver.
  • Repeat step four to fasten all of your mounting hardware to the wall.
  • How to hang your curtains perfectly?

    Length: Make sure the length of your curtains is right

  • Drapery Returns: Use them
  • Train Your Curtains: So they lay properly