What are the rules for dartboard?
This is the simplest of games. Each player starts with a score of 501 and takes turns to throw 3 darts. The score for each turn is calculated and deducted from the players total. Bullseye scores 50, the outer ring scores 25 and a dart in the double or treble ring counts double or treble the segment score.
How do you stop a dart board from shadowing?
One way to reduce shadow is by using more than one light. Strip spotlights like the one pictured at the top of the article are widely available and help to provide the secondary lighting required to eliminate shadows. You also might want to consider using picture lights, like the one below, to light your dart board.
What does the red and green mean on a dartboard?
The red circle in the middle, made of hard wood, is called bulls eye and worth 50 points. It counts as a double. The four green fields surround bulls eye are worth 25 points. The numbers 1 through 20 placed around the board are nominal values for darts hitting the respective fields or sectors.
How do you count points on a dartboard?
The darts board containes numbers 1 to 20.
- The number on the board is amount of the points scored.
- Hitting the outer ring area (Double) scores a double.
- Hitting the thin ring inside the point area (Triple) scores a triple.
- The circle in the center of the board is the bull (50 points).
How do you illuminate a dart board?
Dartboard ring light – the most effective piece of equipment for lighting a dartboard is a ring light. These custom-made lights fit around the dartboard to give even light coverage for maximum visibility without causing shadows or dark spots.
How far should a light be from a dart board?
Dartboard distance measurements The official distance is 237cm (7 feet, 9.25 inches) from the front of your dartboard to the back of the throw line (aka Oche or toe line).
What do the rings on a dartboard mean?
The dartboard is divided into 20 numbered segments and a bullseye. Each segment has 4 scoring areas: 2 single, 1 triple and 1 double. The bullseye has an outer ring (single bull – 25 points) and an inner ring (double bull – 50 points).
What does the D and T mean on a dart board?
Underneath the standard 20 through 15 and B, mark D (for doubles), T (for triples), and 3B (for three-in-a-bed). (Three-in-a-bed means all three darts in the same scoring area.
Where should a dartboard light be placed?
Introduction. The “traditional” way of lighting a dartboard, was to position a spotlight above the board and angle the light down onto the board. The spotlight could be placed on the cieling with the light shining directly onto the face of the board.
What is distance from dartboard to the toe line?
7 ft 91⁄4 in
The oche /ˈɒki/, also the throw line or toe line, in the game of darts is the line behind which the throwing player must stand. For steel tipped darts, it is generally 7 ft 91⁄4 in (2.36855 m) from the face of the dartboard, measured horizontally.
Where is the double ring on a dart board?
About Darts The outer ring of the board is called double, the inner ring on the board is called triple. In the center of the board there are two smaller circles: the inner bull’s eye and the outer bull’s eye. Contestants play alternatively and each of them throws three darts in a turn.
What does B mean in darts?