How do I connect my Taylor scale to my phone?

Instead, turn on the bluetooth, open the Taylor app, touch the “wheel” in the upper right corner, and add the device. Once you’ve created an account and have it paired, make sure the app is opened and step on the scale.

Table of Contents

How do you initialize a Taylor scale?

Initialize Initialization Place one foot on the scale, using just enough weight for the display to show dashes or zeroes. When the display turns on, remove your foot. Once the scale turns off, step back onto it with both feet to see accurate weight.

What apps work with Taylor scales?

Download the free SMARTRACK app or connect to other well known heath & fitness apps, like RunKeeper, MapMyFitness and MyFitnessPal. Cloud based data storage. Tracks weight, and estimates body fat, body water and muscle mass.

Do Taylor scales have an app?

To learn more about the Smart Scale, SmarTrack app, and compatible apps, go to www.taylor-enviro.com or eatsmartproducts.com. SmarTrack also allows you to seamlessly sync your health data with HealthKit.

How do I reset my Taylor scale from kg to lbs?

Instead, press “power”, and then “SET”. Display shows JUST “kg” or “lb”. Press up or down arrow to toggle between Pounds (English units) and Kilograms (metric). Then, tap “SET” 4 times to confirm the other settings for the current user (gender, age and height), and you’re done.

Why is my Taylor scale not working?

Bath Scale Troubleshooting Remove the battery from the scale. Set the scale on the floor (no carpet) without the battery in place. Stand on the scale for 10 seconds (still without the battery). Carefully replace the battery without pressing any buttons or activating the scale.

How can I fix my digital scale?

How to reset your scale?

Remove the batteries.
Leave the scale for about 10 minutes after removing the batteries.
Re-insert the batteries and confirm the polarity is good.
Place your digital scale on a flat surface, and confirm the feet are clear of any dirt or rust particles.
Press the center of the scale lightly.

Does the Taylor scale have an app?

We live in a very connected world and the scale can connect to your phone or tablet, iOS or Android, through the free Taylor app or you can use other popular fitness apps with it.

What does St mean on a Taylor scale?

SET UNIT OF MEASUREMENT Your scale is set to read weight in pounds (lb). Press the “UNIT” button on the bottom of the scale to select kilograms (kg) or stone (st lb) (1 stone = 14 pounds) units of measurement.

How do you calibrate a Taylor digital scale?

Remove the battery from the scale.

Sit the scale on a hard surface floor.

Step up onto the scale,stand still for about 5 seconds and step off the scale.

Re-install your battery.

How to calibrate your digital scale?

Zero out your scale. Press down on the dial,then lift your hand.

Test the accuracy of the scale. Weigh something that has a known weight.

Reweigh the product five times. Take it off the weight and repeat the process five times.

Weigh yourself and the product. Now hold the product in your hand and step on the scale.

Take the scale to a different location.

How to troubleshoot a Taylor digital bathroom scale?

– Press ON/OFF to turn the scale on, and wait for the scale to stabilize, where it reads 0.0g. – Press and hold the MODE key, the middle button that says “M”, until the display reads “CAL”. – Take one more look at the platform to make sure it is totally bare.

How to adjust a digital scale?

Inaccurate readings from a different scale

Inconsistent readings

Damages from corrosion

Poor display (readability) of the LCD indicator