How do I Reset my Cisco 2900 router to factory settings?
Reset Router to Default Configuration
- With the router powered off, connect the power cord to your router, and plug the power cord into your power source.
- Find the Reset button on the router.
- Press and hold the Reset button while you power on the router.
- Release the Reset button after 10 seconds.
How do you Reset a Cisco Catalyst?
Hold the “mode” button on the front of the switch for 10 seconds. The lights will blink then go solid – the switch completely wipes all configuration and then reboots.
How do I Reset my Cisco switch to factory settings?
Resetting the Cisco IP switch to factory defaults
- Reset the switch to factory defaults: Erase the existing configuration: write erase. Reload the switch software: reload.
- Save the configuration: IP_switch-A-1# copy running-config startup-config.
- Reboot the switch and wait for the switch to reload: IP_switch-A-1# reload.
How do I Reset my Cisco Catalyst 2950 to factory settings?
If indeed the switch has a MODE button on the front panel, Step 1: turn off/on the switch while holding the button down for roughly 15 seconds. Step 2: You will be able to view the led lights blink, and now the switch should have reset to default on system restart once you release the mode button.
Where is the Reset button on cisco router?
The default username is cisco and the default password is cisco. Step 1. Press the Reset button located at the back of the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The Router reloads and is set to the default configuration settings.
How do you Reset a cisco Managed switch?
Step 1. Disconnect all Ethernet cables from the switch. Step 2. Using a pin, press and hold the Reset button on the switch for 15 to 20 seconds.
How do I erase a cisco router configuration?
Enter configure terminal to go to Global Configuration Mode. Enter config-register 0x2102. Enter end, and then enter the write erase command to delete the current startup configuration on the router. Enter reload to reload the router.
How do you reset a switch?
How to Perform a Hard Reset (Factory Reset) on a Nintendo Switch
- With the system powered down, hold the power button until the console resets. This step can take up to 15 seconds.
- Release the power button, then press it once to start the console like normal.
- Your console should boot up without any issue.
How do you Reset your router?
To reset your router:
- Locate the Reset button on the back of your router.
- With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds.
- Wait for the router to fully reset and power back on.
What is the command to restart a Cisco switch?
Log in to the web-based utility of the switch and choose Administration > Reboot. In the Reboot area, click the radio button that corresponds to the desired time at which the switch reboots. The options are: Immediate – Switch reboots immediately once Reboot is clicked.
How do you soft reset a Switch?
Soft Reset Nintendo Switch Step 1: Press and hold the small circular Power button on the top of the Switch console until the system powers off. This process takes you 15 seconds at most. Step 2: After waiting for a while, press the Power button again. Step 3: You will see the Nintendo logo on the screen.
How do you reboot a switch?
To display the Power Menu on a Nintendo Switch system, press and hold the POWER Button for at least three seconds. Select Power Options, then choose to either turn off, restart, or set the system to Sleep Mode.