Why did my sub zero stop making ice?
Verify the ice maker is free of obstructions or jammed ice cubes. It may be necessary to defrost the freezer to clear the ice maker. Refer to Manually Defrost a Sub-Zero for instructions.
Why isn’t my GE refrigerator not making ice?
The icemaker must reach a temperature of 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.
How do you reset the ice maker on a GE refrigerator?
Tips for Resetting a GE Ice Maker
- Adjust the feeler arm. If water doesn’t immediately start filling in the reservoir, go to step 2.
- Press the on/off button.
- Keep the ice maker unplugged for 15 minutes.
- Turn the ice maker back on.
How do you reset a Sub-Zero freezer?
To reset a Sub-Zero product:
- Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
- Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.
How do you unlock a Sub-Zero ice maker?
Troubleshooting:
- Press and hold the Light button for 5 seconds to turn on the dispenser lock. The lock indicator (key icon) beneath the Light button illuminates when the dispenser locks. Locking the dispenser disables the water and ice dispensing features.
- To unlock, press and hold Light for 5 seconds.
Is there a reset button for a Sub-Zero refrigerator?
To reset a Sub-Zero product: Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
What is the lifespan of a Sub-Zero refrigerator?
A typical refrigerator, according to Sears Home Services, has a lifespan of about 10 to 13 years. A Sub-Zero, according to Jeff Sweet, manager of product marketing for Sub-Zero, Wolf and Cove, should last, 20 or more years.
How do I reset my Sub-Zero refrigerator?
How do I unfreeze my ice maker?
How to Defrost an Ice Maker
- Unplug the refrigerator and remove any ice from the ice maker and the ice tray.
- Locate the water refill tube that runs to the ice maker.
- Turn a hair dryer on low speed and point it at the refill tube to defrost.
- Replace the metal clip and the ice tray before plugging in the refrigerator.
Why is water not going into my ice maker?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. Repairing an ice maker that isn’t receiving water is a process of elimination.